More information about Furniture Film Mustard Yellow Matte – Rich Yellow for Furniture
This mustard yellow furniture film brings a warm, vibrant color to your home. The matte surface provides a subtle, modern finish that visually refreshes cabinets, drawers, and shelves. As a self-adhesive furniture film, it is especially suitable for smooth indoor furniture surfaces and lets you wrap furniture without painting.
The film is made from a partially polymer PVC main layer with a material thickness of 0.07 mm (excluding liner and adhesive) and a permanent adhesive. For application, we recommend a minimum temperature of 10 °C to ensure optimal adhesion and a clean finish.
Application and Use
Use the furniture film to give cabinet fronts, doors, table edges, or smaller surfaces a fresh new look. The film is ideal for creative projects, quick renovations, and DIY furniture makeovers. When wrapping furniture, ensure the surface is smooth and grease-free, and work in sections to avoid wrinkles.
Available Sizes
The self-adhesive furniture film is available in three widths: 63 cm, 100 cm, and 126 cm. As running meters, we offer the following increments: 1 Lfm, 2 Lfm, 3 Lfm, 4 Lfm, 5 Lfm, 10 Lfm, 15 Lfm, 20 Lfm, 25 Lfm, 30 Lfm, 35 Lfm, 40 Lfm, 45 Lfm, and 50 Lfm. This allows you to choose the right length for your project without ordering more than you need.
The color is a warm, rich mustard yellow (RGB 242,226,16) that brightens up rooms and works as an accent or a continuous color surface. As an adhesive film for furniture, it offers an easy design solution for interiors when you want to wrap furniture and are looking for a single-color, matte look.
| Durability |
Durability :with vertical outdoor exposure, normal Central European climate
|
|---|---|
| Shelf Life |
2 Year(s) | in original packaging, at 20 °C and 50% relative humidity |
| Maximum shrinkage |
Maximum shrinkage along 0.4 mm
|
| Elongation at break |
Minimum elongation at break along 130 %
|
| Tensile strength |
Minimum tensile strength along: 19 N/mm²
|
| Seawater resistance |
no change | after 100h/35°C | adhered to aluminum, DIN EN ISO 9227 |
| Temperature resistance |
Minimum temperature: -40 °C
|
| Adhesive power |
18 N/25 mm | after 24 h, on stainless steel | Average value, FINAT TM 1 |
| Adhesive |
Permanent |
| Recommended printing procedure |
Digital thermal transfer printing |
| Application temperature |
Minimum temperature 10 °C |
| Front material |
Thickness front material: 0.07 mm
|
| Thickness |
0.07 mm | Average value, without protective liner and adhesive |
| Format |
Roll |
| Standard width |
1260 mm
|
| Standard length |
50 m |
Frequent Questions on Furniture Film Mustard Yellow Matte – Rich Yellow for Furniture
What furniture surfaces is furniture film suitable for?
Suitability depends on the specific product and the existing surface. Compare the material, coating and condition of the surface with the product specifications.
How do I measure a piece of furniture for furniture film?
Measure the fronts, sides, panels and visible edges individually. Note any cut-outs, handle holes and the desired direction of the design, rather than using only the overall dimensions of the furniture.
How much furniture film should I order?
Add up the dimensions of all the intended sections and take into account the edges required for the product and project, as well as a reasonable cutting allowance. Check the format and scope of delivery on the product page.
How do I plan the decor direction across multiple fronts?
Before cutting, define a direction and number the doors and drawers. This makes it possible to continue wood, stone or linear looks consistently across adjacent surfaces.
Do I need to remove doors and handles before applying the film?
That depends on the furniture and the project. Removable parts often make it easier to measure and work on edges; follow the assembly instructions for the furniture and the product.
How do I prepare a furniture surface?
The surface should be suitable according to the product specifications, clean, dry, and free of any residue that could interfere. Always test sensitive or unclear surfaces first in an inconspicuous area.
Can I simply cover damaged furniture with adhesive film?
Film does not automatically compensate for structural damage. Loose coatings, raised areas or deep damage may remain visible and must be professionally assessed beforehand.
Where can I find the installation instructions for my furniture film?
The binding instructions are provided with the respective product. The pages on measuring furniture, choosing the right film and planning the installation also provide helpful information.
Planning Furniture Film: Consider Surface, Pattern Direction and Edges Together
A successful furniture film project begins before cutting. Mentally divide the furniture into fronts, sides, panels, edges and cut-outs. Measure each part individually and note which surfaces will remain visible. Then check the product information for the existing substrate.
For wood, stone and linear patterns, establish a consistent pattern direction. Number doors and drawers so that the cut pieces and pattern flow can be clearly assigned later. Include visible edges, handle holes and transitions in the quantity calculation from the outset.
- measure each front, side and panel separately
- establish the pattern direction before cutting and installation
- prepare the substrate clean, dry and in accordance with the product information
- take edges, cut-outs and allowances into account during planning