More information about Furniture Film Light Red Glossy
With this light red furniture film, you get a striking, glossy decorative surface for smooth indoor furniture surfaces. The self-adhesive furniture film can be ordered in preset running meters and is available in three widths, allowing you to customize cabinet doors, shelves, or trays to fit perfectly.
The film is made from a partially polymer PVC material with a front thickness of approximately 0.07 mm and a permanent adhesive. Please ensure a minimum application temperature of 10 °C during installation. The glossy finish emphasizes the rich, warm red tone and adds vibrant color accents to both modern and classic interior styles.
Areas of Application
Ideally suited for covering smooth cabinet fronts, shelves, and work surfaces indoors. The adhesive film for furniture is especially useful if you want to refresh small areas with color or completely redesign entire fronts. For best results, surfaces should be clean, dry, and smooth.
Order Options and Cutting
The furniture film is available in widths of 63 cm, 100 cm, and 126 cm. Lengths are offered in graduated running meters: 1 m, 2 m, 3 m, 4 m, 5 m, 10 m, 15 m, 20 m, 25 m, 30 m, 35 m, 40 m, 45 m, and 50 m. This allows you to choose the right amount for your project without relying on a continuous centimeter selection.
When covering furniture, it is recommended to measure before purchasing and to allow for some excess material. Use suitable tools such as a squeegee and a sharp cutting tool when applying to achieve clean edges.
This color variant, a light, warm red with a glossy finish, fits well with modern color schemes and as an accent color in kitchen-living rooms, living rooms, or home office areas.
| Durability |
Durability :with vertical outdoor exposure, normal Central European climate
|
|---|---|
| Shelf Life |
2 Year(s) | in original packaging, at 20 °C and 50% relative humidity |
| Maximum shrinkage |
Maximum shrinkage along 0.4 mm
|
| Elongation at break |
Minimum elongation at break along 130 %
|
| Tensile strength |
Minimum tensile strength along: 19 N/mm²
|
| Seawater resistance |
no change | after 100h/35°C | adhered to aluminum, DIN EN ISO 9227 |
| Temperature resistance |
Minimum temperature: -40 °C
|
| Adhesive power |
18 N/25 mm | after 24 h, on stainless steel | Average value, FINAT TM 1 |
| Adhesive |
Permanent |
| Recommended printing procedure |
Digital thermal transfer printing |
| Application temperature |
Minimum temperature 10 °C |
| Front material |
Thickness front material: 0.07 mm
|
| Thickness |
0.07 mm | Average value, without protective liner and adhesive |
| Format |
Roll |
| Standard width |
1260 mm
|
| Standard length |
50 m |
Frequent Questions on Furniture Film Light Red Glossy
What furniture surfaces is furniture film suitable for?
Suitability depends on the specific product and the existing surface. Compare the material, coating and condition of the surface with the product specifications.
How do I measure a piece of furniture for furniture film?
Measure the fronts, sides, panels and visible edges individually. Note any cut-outs, handle holes and the desired direction of the design, rather than using only the overall dimensions of the furniture.
How much furniture film should I order?
Add up the dimensions of all the intended sections and take into account the edges required for the product and project, as well as a reasonable cutting allowance. Check the format and scope of delivery on the product page.
How do I plan the decor direction across multiple fronts?
Before cutting, define a direction and number the doors and drawers. This makes it possible to continue wood, stone or linear looks consistently across adjacent surfaces.
Do I need to remove doors and handles before applying the film?
That depends on the furniture and the project. Removable parts often make it easier to measure and work on edges; follow the assembly instructions for the furniture and the product.
How do I prepare a furniture surface?
The surface should be suitable according to the product specifications, clean, dry, and free of any residue that could interfere. Always test sensitive or unclear surfaces first in an inconspicuous area.
Can I simply cover damaged furniture with adhesive film?
Film does not automatically compensate for structural damage. Loose coatings, raised areas or deep damage may remain visible and must be professionally assessed beforehand.
Where can I find the installation instructions for my furniture film?
The binding instructions are provided with the respective product. The pages on measuring furniture, choosing the right film and planning the installation also provide helpful information.
Planning Furniture Film: Consider Surface, Pattern Direction and Edges Together
A successful furniture film project begins before cutting. Mentally divide the furniture into fronts, sides, panels, edges and cut-outs. Measure each part individually and note which surfaces will remain visible. Then check the product information for the existing substrate.
For wood, stone and linear patterns, establish a consistent pattern direction. Number doors and drawers so that the cut pieces and pattern flow can be clearly assigned later. Include visible edges, handle holes and transitions in the quantity calculation from the outset.
- measure each front, side and panel separately
- establish the pattern direction before cutting and installation
- prepare the substrate clean, dry and in accordance with the product information
- take edges, cut-outs and allowances into account during planning